Product categories
- All
- Baby Change Stations
- Bench Seats
- Coat Hook
- Commercial Door Hardware
- Dispensers
- Grab Rails and Back Rests
- Hand Dryer / Waste Receptacle Combination
- Hand Dryers
- Mirrors
- Misc
- Paper Towel Dispensers
- Pinboards
- Shelf
- Shower Accessories
- Shower Kits
- Shower Tracks / Curtains
- Signage
- Soap Dish
- Table Tops
- Toilet / Shower Partition Hardware
- Toilet Partition Kits
- Toilet Partitions
- Toilet Roll Holders
- Towel Bar
- Waste Management
- Whiteboards
- ⭐Sale⭐🛒
Showing 1 − 12 of 29 results
GRAB RAIL – SHOWER EXTENDED COMBINATION HORIZONTAL & VERTICAL 1 PIECE 1000 X 760 X 1100 MM JDM-GEC-1
Please note that deliveries may be delayed up to 4 weeks for this product.
*Right Handing image shown.
Features:
– Fabricated of grade 304 stainless steel
– Concealed flanges
Specification:
– Designed for the safety, security and convenience of the physically disabled.
– Easy to install on most building surfaces.
– Grab Rails shall be type 304 stainless steel alloy 18-8.
– Tubing shall be 32mm diameter x 18 gauge (1.2mm).
– Flange shall be 3mm thick and shall be Heliarc welded to tubing with a continuous concealed bead and shall have three (3) 7mm diameter mounting holes.
– Cover plates to conceal flange and fixings shall be 22 gauge (0.8mm) stainless steel.
– All exposed surfaces shall have a Satin finish.
– 1000mx760mmx1100mm
Installation
– To comply with Australian Standards, grab rails must be fastened a minimum distance of 800mm from the floor, with 600mm of clear space above the rail and to withstand a force of
1100N at any point from any direction.
Warranty
12 months from the date of purchase
GRAB RAIL – SHOWER EXTENDED COMBINATION HORIZONTAL & VERTICAL 1 PIECE WITH CLEAN SEAL, EASY SLIDER & HANDLE 1000 X 760 X 1100 MM GCS34
Please note that deliveries may be delayed up to 4 weeks for this product.
GRAB RAIL – SHOWER INVERTED ‘T’ 1 PIECE 700 X 1100 MM JDM-GIT-7
Please note that deliveries may be delayed up to 4 weeks for this product.
Features
– Fabricated of grade 304 stainless steel
– ‘T’ shape grab rail and concealed flanges
Specification
– Designed for the safety, security and convenience of the physically disabled.
– Easy to install on most building surfaces.
– Grab Rails shall be type 304 stainless steel alloy 18-8.
– Tubing shall be 32mm diameter x 18 gauge (1.2mm).
– Flange shall be 3mm thick and shall be Heliarc welded to tubing with a continuous concealed bead and shall have three (3) 7mm diameter mounting holes.
– Cover plates to conceal flange and fixings shall be 22 gauge (0.8mm) stainless steel.
– All exposed surfaces shall have a satin finish.
Installation
– To comply with Australian Standards, grab rails must be fastened a minimum distance of 800mm from the floor, with 600mm of clear space above the rail and to withstand a force of 1100N at any point from any direction.
Warranty
12 months from the date of purchase
GRAB RAIL – SHOWER INVERTED ‘T’ HORIZONTAL & VERTICAL WITH CLEAN SEAL, EASY SLIDER & HANDLE 700 X 1100 MM GRCSES29
Features:
➡️ Made of grade 304 stainless steel
➡️ ‘T’ shape grab rail and hygienically sealed flanges in a heavy duty alloy casting
➡️ Kit includes, 700 x 1100mm, Slider, Handle
GRAB RAIL – TOILET DROP DOWN 800 X 300 MM JDM-GDD
Features
– Adjustable to 3 positions
– Fabricated of grade 304 stainless steel
– Dropdown grab rail
Specification
– Designed for the safety, security and convenience of the physically disabled.
– Easy to install on most building surfaces.
– Dropdown Grab Rail shall be type 304 stainless steel alloy 18-8.
– All exposed surfaces shall have a satin finish.
Installation
– To comply with Australian Standards, grab rails must be fastened a minimum distance of 800mm from the floor, with 600mm of clear space above the rail and to withstand a force of 1100N at any point from any direction.
Warranty
– 12 months from the date of purchase.
GRAB RAIL – TOILET DROP DOWN WITH LOCK 800 X 300 MM JDM-GDD-STL
Please note that deliveries may be delayed up to 4 weeks for this product.
Features
– Adjustable to 3 positions
– Fabricated of grade 304 stainless steel
– Dropdown grab rail
– Dimensions: 800mm L x 300mm H x 200mm W
– Also available with Toilet Roll Holder: JDM-GDD-TRH
Specification
– Designed for the safety, security and convenience of the physically disabled.
– Easy to install on most building surfaces.
– Dropdown Grab Rail shall be type 304 stainless steel alloy 18-8.
– Tubing shall be 32mm diameter x 18 gauge (1.2mm).
– Rail is adjustable to 3 positions.
– All exposed surfaces shall have a satin finish.
Installation
– To comply with Australian Standards, grab rails must be fastened a minimum distance of 800mm from the floor, with 600mm of clear space above the rail and to withstand a force of 1100N at any point from any direction.
Warranty
– 12 months from the date of purchase
GRAB RAIL – TOILET DROP DOWN WITH TOILET ROLL HOLDER 800 X 300 MM JDM-GDD-TRH
Features
– Adjustable to 3 positions
– Fabricated of grade 304 stainless steel
– Dropdown grab rail with Toilet Roll Holder
– Dimensions: 800mm L x 300mm H x 200mm W
Specification
– Designed for the safety, security and convenience of the physically
disabled.
– Easy to install on most building surfaces.
– Dropdown Grab Rail with Toilet Roll Hook shall be type 304 stainless
steel alloy 18-8.
– All exposed surfaces shall have a satin finish.
Installation
– To comply with Australian Standards, grab rails must be
fastened a minimum distance of 800mm from the floor, with
600mm of clear space above the rail and to withstand a force of
1100N at any point from any direction.
Warranty
– 12 months from the date of purchase.
GRAB RAIL – TOILET SLOPING ARM 40 DEGREES FROM HORIZONTAL 1 PIECE 1110 X 950 X 700 MM JDM-GFN-1
Please note that deliveries may be delayed up to 4 weeks for this product.
GRAB RAIL – TOILET SLOPING ARM 40 DEGREES FROM HORIZONTAL WITH GERM SHIELD 840 X 700 MM JDM-GFS-8
Please note that deliveries may be delayed up to 4 weeks for this product.