- Baby Change Stations
- Bench Seats
- Coat Hook
- Commercial Door Hardware
- Grab Rails and Back Rests
- Hand Dryer / Waste Receptacle Combination
- Hand Dryers
- Paper Towel Dispensers
- Shower Accessories
- Shower Kits
- Shower Tracks / Curtains
- Soap Dish
- Table Tops
- Toilet / Shower Partition Hardware
- Toilet Partition Kits
- Toilet Partitions
- Toilet Roll Holders
- Towel Bar
- Waste Management
BTM SYSTEM – STAINLESS STEEL CABINET WITH FRAMELESS MIRROR, LIQUID SOAP DISPENSER AND HIGH-SPEED HAND DRYER, VELARE™ COLLECTION 10-0661-2
Please note that deliveries may be delayed up to 4 weeks for this product.
Enter your postcode to check delivery availability
|5 - 200||5%||$4,324.12|
ASI JD MacDonald’s Velare™ Behind the Mirror (BTM) is designed with elegance and safety in mind, concealing consumables in a cabinet made from type 304 stainless steel. The cabinet features a mirrored door with back-lit icons that indicate functions provided from the bottom panel of each module. The mirror is made from 6 mm thick frameless tempered glass with pencil edges and eased corners with SS sheet intermediate stiffener and SS backplate with integral welded support mounts, hinge and lock keeper.
The mirrored door is attached to the cabinet using a full-width 4.8mm diameter concealed piano hinge and is secured shut using a tumbler lock and key. Support for mirror door is provided by twin damped gas springs to assist opening from 15° to 90° with soft-stop cushion at full open and when lowering to the full closed position for locking.
This wall-mounted stainless steel cabinet conceals a hands-free automatic liquid soap dispenser with a 6 L capacity and a high-speed hand dryer (208-220V) equipped with a HEPA filter.
Mirror back-lights operate on 100 – 240 VAC provided to quad (double-duplex) outlet (by others) concealed behind the cabinet into which a standard appliance power cord and AC adaptors are plugged into at installation.
• Soap Requirements: Proper usage of this dispenser requires, that only soap within the following range for viscosity and pH may be used.
• Viscosity Range (mPa·s or cP): 100 – 3000
• pH Range: 5.5 ~ 8.5
Matching filler modules (FM) are available as spacers between cabinets.