- Baby Change Stations
- Bench Seats
- Coat Hook
- Commercial Door Hardware
- Grab Rails and Back Rests
- Hand Dryer / Waste Receptacle Combination
- Hand Dryers
- Paper Towel Dispensers
- Shower Accessories
- Shower Kits
- Shower Tracks / Curtains
- Soap Dish
- Table Tops
- Toilet / Shower Partition Hardware
- Toilet Partition Kits
- Toilet Partitions
- Toilet Roll Holders
- Towel Bar
- Waste Management
Surface Mounted Paper Towel Dispenser – Matte Black 10-0210-41
Item Number: 10-0212-41
* Surface Mounted Paper Towel Dispenser shall hold and dispense standard multi-fold or standard C-fold paper towels and shall be fabricated of 304 stainless steel, finished in matte black powder coat.
* Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety.
* Dispenser door shall be held close with a tumbler lock.
* Unit shall be provided with refill viewer slot on the front. Back of unit shall have keyhole slots for hanging on pre-installed screws (by others).
* Towels are self-feeding until supply is depleted. The unit may be refilled with a partial load in-place and will continue to feed properly. Low level of towel supply is indicated from 25% capacity empty
* One year warranty
* Unit is surfaced mounted on wall or partitioning. For mounting height, standards refer to the current Building Code
of Australia for able-bodied and/or disabled us.
*Size: 280mm W x 375mm H x 103mm D
Enter your postcode to check delivery availability
|5 - 200||5%||$138.03|