GRAB RAIL – TOILET, STRAIGHT, VARIOUS SIZES (JDM-GSN)

Description

JDM-GSN-3 : 300mm L x 32mm Dia
JDM-GSN-4 : 400mm L x 32mm Dia
JDM-GSN-4S : 450mm L x 32mm Dia
JDM-GSN-5 : 500mm L x 32mm Dia
JDM-GSN-6 : 600mm L x 32mm Dia
JDM-GSN-7 : 700mm L x 32mm Dia
JDM-GSN-7S : 750mm L x 32mm Dia
JDM-GSN-8 : 800mm L x 32mm Dia
JDM-GSN-9 : 900mm L x 32mm Dia
JDM-GSN-10 : 1000mm L x 32mm Dia
JDM-GSN-12 : 1200mm L x 32mm Dia
JDM-GSN-15 : 1500mm L x 32mm Dia
JDM-GSN-20 : 2000mm L x 32mm Dia

Features:

* Satin Stainless Steel
* Fabricated of grade 304 stainless steel
* Concealed flanges

SPECIFICATION

Designed for the safety, security and convenience of the physically disabled. Easy to install on most building surfaces. Grab Rails shall be type 304 stainless steel alloy 18-8. Tubing shall be 32mm diameter x 18 gauge (1.2mm). Flange shall be 3mm thick and shall be Heliarc welded to tubing with a continuous concealed bead and shall have three (3) 7mm diameter mounting holes. Cover plates to conceal flange and fixings shall be 22 gauge (0.8mm) stainless steel.

RECOMMENDED INSTALLATION

To comply with Australian Standards AS 1428.1, grab rails must be fastened a minimum distance of 800mm from the floor, with 600mm of clear space above the rail and to withstand a force of 1100N at any point from any direction.

WARRANTY

Grab Rail products distributed by ASI JD MacDonald are guaranteed to be free from defective materials and workmanship for 12 months from the date of purchase, subject to the product being installed and maintained in accordance with the Installation and Operating instructions (fixings supplied by others)